Features:
In line depth stop which allows you to stop at preset depths without racking the drill bit to the base
Heavy duty reversible handle that can be changed from one side to the other quickly and easily and requires no tools to do so
The stock hold down features a double lock system, one locks from the side the other locks from the top to completely eliminate any slippage when removing the chisel from the work piece
Quick action cam lock will quickly lock the fence into position with one 90 degree movement. The lock also feature lock nuts so once set they will not have to continually be adjusted
Integrated bit and chisel spacer. Two spacers are used to accurately and quickly determine for the space needed between the bit and chisel during set up
Large work surfaces in the table and fence allow for more stability and accurate cuts
Large hinged chuck door with magnetic catch allows you to easily access the drill chuck with the standard 4" chuck key to lock the bit in place
Rack and pinion allows for simple and quick fence adjustments
Specifications:
Spindle Speed (RPM) 1,725
Chuck Capacity (in.) 1/2
Chisel Shank Capacity (in.) 3/4
Head Stroke (in.) 5-1/2
Chisel Center to Fence (in.) 4-3/8
Under Hold-Down (in.) 4
Fence Size (in.) 2-5/8x12-1/2
Base Size (in.) 16-5/16x13-3/4
Bushing Size (in.) 5/8 and 3/4
Motor (TEFC) 3/4HP, 1Ph, 115V
Net Weight (lbs.) 93
This new mortiser features heavy-duty cast iron construction and powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble free service. The heavy rack and pinion gear system utilizes a spring loaded six position adjustable handle for travel and a unique gas filled shock to allow for smooth movement. A handy depth stop gives a uniform finish on work. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35º.
The table can also move left and right and forward and back with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work holding force and will swivel to accommodate angled workpiece. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.
FEATURES
Sturdy cast iron construction with precision-machined column and table
Quick position table mounted swiveling vise clamp accommodates angled work pieces
Feed lever features six positions allowing for quick adjustments
Table and fence tilt from 0 to 35º
Gas cylinder controlled rack and pinion head raising and lowering system provides smooth operation
Quick adjust depth stop
Hand wheels control linear cross movements of table
Hinged access door allow easy access for quick bit changes
Includes bushings to fit 5/8, 3/4 and 1-1/8" chisel shanks
STANDARD EQUIPMENT
Work stop for repeat cut
Depth and length stops
Enclosed stand with shelf
Gas spring assists head travel for smooth movement
Quick-release vise for speedy release of work material
6 position feed lever
Spindle Speed (RPM) 1,725
Chuck Capacity (in.) 1/2
Chisel Shank Capacity (in.) 5/8, 3/4, 1-1/8
Maximum Chisel Stroke (in.) 8
Chisel Center to Fence (in.) 4
Table Size (in.) 10 x 20
Fence Size (in.) 3-1/2 x 20
Base Size (in.) 14 x 16
Bushing Size (in.) 5/8, 3/4, 1-1/8
Overall Height on Base (in.) 61
Shipping Weight (lbs.) 277
Features:
Heavy-duty cast iron construction and a powerful 1-1/2HP motor for the most demanding jobs
Heavy rack and pinion gear system utilizes a spring loaded adjustable position handle for travel and a unique gas filled shock to allow for smooth movement
Adjustable gibs with rack and pinion head control
Adjustable linear stops and a flip down stop allow for precision repeatability
Quick adjust support arm will support even heavy exterior
Three spring loaded adjustable position handles. Head con move left to right and forward and back with the spring loaded adjustable position handles
Quick adjust table clamp provides plenty of workholding force
Heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories
Handy depth stop gives a uniform finish on work
A large 14-5/8" x 7-1/8" table gives plenty of work support and will adjust to any angle between 0 and 90 degrees
Specifications:
Motor 1-1/2HP, 1Ph, 230V
Motor Speed (RPM) 1,725
Chuck capacity (in.) 1/2
Table size (L x W/in.) 17-5/8 x 7-1/8
Table tilts (degrees) 0 to 90
Fence size (L x H/in.) 14-5/8 x 11-3/4
Head travel (left to right/in.) 9-1/8
Head travel (front to back/in.) 3-3/8
Maximum work piece height (in.) 43-7/8
Bushing sizes (in.) 3/4 I.D. / 5/8 I.D. / 1-1/8 O.D.
Chisel stroke (in.) 6-1/8
Base size (L x W/in.) 25-1/2 x 22
Overall height (in.) 80
Gross weight (lbs.) 575
Net weight (lbs.) 490
All prices subject to change. Delivery charges may or may not apply.
Taxes not included. Information accurate at time of production but may slightly differ from actual product specifications,
always verify before ordering. Contact us for more information.
View Manual
