The Oliver 5525 25" Dual Oscillating Drum Sander is Oliver innovation and tradition in true form. It’s innovative: the 5525 is the only one in its class on the American market, and features over a half inch of oscillating travel, quick change sandpaper, an independently adjustable rear drum and more. The 5525 is also built in line with Oliver’s rich tradition: with a 10HP motor, solid cast iron base, 4 post table construction, twin 4” dust ports, an amp meter, and a 2 year warranty, this Oliver is built to give quality results for years and years.
Stock No.
5525.003 (10HP, 1 Ph)
5525.004 (10HP, 3 Ph)
Oscillation Travel (in.) 5/8
Drum Diameter (in.) 6
Number of Drums 2
Drum Speed (RPM) 1,725
Abrasive Belt Size (in.) 4 x 162
Maximum Stock Width (in.) 25
Maximum Stock Thickness (in.) 4
Minimum Stock Thickness (in.) 0.2
Minimum Stock Length (in.) 9
Maximum Stock Removal
Workpiece Under 25" (in.) 0.04
Maximum Stock Removal
Workpiece at Full Capacity (in.) 0.02
Conveyor Speed (FPM) 10, 14
Table Size (W x L/in.) 29 x 45
Main Motor 10HP, 1Ph, 220V Only
Conveyor Feed Motor 1/2HP, 1Ph, 220V Only
Gross Weight (lbs.) 1,400
The Oliver 5555 37" Dual Oscillating Drum Sander is Oliver innovation and tradition in true form. It will sand peices up to 37" wide. Like its smaller brother the 5525, it's innovative: the 5555 is the only one in its class on the American market, and features over a half inch of oscillating travel, quick change sandpaper, an independently adjustable rear drum and more. The 5555 is also built in line with Oliver's rich tradition: with a 15HP motor, cast iron base, 4 post table construction, twin 4" dust ports, an amp meter, and a 2 year warranty, this Oliver is built to give quality results for years and years.
Oscillation Travel (in.) 5/8
Drum Diameter (in.) 6
Number of Drums 2
Drum Speed (RPM) 1,725
Abrasive Belt Size (in.) 6 x 162
Maximum Stock Width (in.) 37
Maximum Stock Thickness (in.) 4
Minimum Stock Thickness (in.) .078
Minimum Stock Length (in.) 9
Maximum Stock Removal
Workpiece Under 37" (in.) 0.04
Maximum Stock Removal
Workpiece at Full Capacity (in.) 0.02
Conveyor Speed (FPM) 10, 14
Table Size (W x L/in.) 41 5/32 x 33
Main Motor 15HP, 3Ph, 230V/460V Prewired 230V
Conveyor Feed Motor 1HP, 3Ph, 230V/460V Prewired 230V
Gross Weight (lbs.) 2,170
The Oliver 6910 Oscillating Spindle Sander does perfectly what other sanders can't: finely sands concave surfaces. The oscillating motion of its spindle uses more of the paper and dissipates heat much more efficiently than standard spindle sanders, which helps prevent burning and streaking. Plus, the rubber drums can be mounted on both ends, so you can use the entire spindle. The extra large precision ground table tilts to 45° and has a positive stop at 0°, plus it has corner cuts for easier operation all the way around the machine. The base is heavy gauge steel giving you an extremely stable table to work on, and it offers storage space for up to 10 extra spindles while not in use.
Stock No. 6910.003 (2 HP, 110V - 220V,
Prewired 220V)
Table Material Cast Iron
Table Size (in.) 25-1/4 x 27-1/4
Table Tilt (deg.) 0 to 45
Table Height (Floor to Top, in.) 42-1/2
Number of Table Inserts 3
Spindle Speed (RPM) 1,720
Oscillation Travel (in.) 1-1/2
Oscillations Per Minute 75
Spindle Sizes (dia. x length, in.): 1/4 x 5
3/8 x 6
1/2 x 6
5/8 x 6
3/4 x 9
1 x 9
1-1/2 x 9
2 x 9
3 x 9
4 x 9
Dust Port Diameter (in.) 4
Overall Dimensions (L x W x H/in.) 25-1/4 x 27-1/4 x 50
Gross Weight(lbs.) 320
All prices subject to change. Delivery charges may or may not apply.
Taxes not included. Information accurate at time of production but may slightly differ from actual product specifications,
always verify before ordering. Contact us for more information.
View Manual
